Rode VideoMic Pro Rycote

Microphone canon supercardioïde condensateur 40Hz - 20kHz / Jack

Le Rode VideoMic Pro R est un véritable micro canon conçu pour une utilisation avec les caméscopes, appareils photo reflex numériques et les enregistreurs audio portables comme une source de l'audio primaire et de référence.

5 produit(s) en stock
223,20 € TTC
186,00 € HT
Référence : 100262-VideoMic PRO RYCOTE - Id : 746297

The RØDE VideoMic Pro is a true shotgun microphone designed for use with camcorders, DSLR cameras and portable audio recorders as a source of primary and reference audio.

At the heart of the VideoMic Pro is an all-new 1/2" condenser capsule that provides broadcast-quality audio via a 3.5mm minijack connector (outputting the mono signal to both left and right channels) with an incredibly low self-noise of just 14db. A super-cardioid polar pattern ensures that surrounding audio is minimised, and your recording is focused on the subject in front of the camera.

The integrated Rycote® Lyre® based shock mounting system separates the VideoMic Pro capsule and electronics from its mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.

Easily accessible on the rear face of the microphone are the power, filter and level controls. In addition to the microphone's native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

Below these controls are the level settings, which attenuate or boost the recorded level as required. The -10dB level attenuation (or PAD) is ideal for recording loud sound sources, such as live music, motorsport, or interviews where the subject is very close to the camera. The +20dB level boost is designed for use with DSLR cameras, allowing the user to reduce the camera's preamp level (or mic-input level), effectively reducing the amount of noise generated by the camera's comparatively low quality audio circuitry.

The microphone uses a standard sized shoe mount for on camera use, and features a 3/8" thread in the base of the mount for easy boom pole mounting.

The VideoMic pro is battery powered, and provides over 70 hours recording from a single 9V battery.

The RØDE VideoMic is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.

Principe acoustique Line Gradient
Electronique active JFET impedance converter
Capsule 0.50"
Captation End
Bande passante 40Hz - 20kHz(HPF @80)
Impédance de sortie 200?
Niveau max. de pression sonore (SPL) 134dB (@1kHz, 1% de distorsion harmonique sous 1k?)
Niveau de sortie maximum 6.9dBu (@1kHz, 1% de distorsion harmonique sous 1k?)
Sensibilité -32.0dB re 1 Volt/Pascal (20.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Niveau de bruit équivalent (pondération A) 14dB-A
Niveau de bruit équivalent (pondération A) 85gm
Niveau de bruit équivalent (pondération A) 100mmH x 75mmW x 170mmD
Garantie 1 an avec extension gratuite de la garantie à 10 ans après enregistrement
VideoMic Pro R Compact Directional On-camera Microphone
Produits similaires
Top